2014 Redwood 36 RL

[Benelli]

Just purchased 2014 36 RL and discovered that the black tank flush is not working properly. I have taken back to the dealer 2 times and still not working. Any Suggestions ?

[coloradolivin]

Check behind the basement wall where the filter is and see if you don't have a kink in that line. Ours did on PdI and it was re-routed and works fine

[Rick and Mindy]

Originally Posted by Benelli

Just purchased 2014 36 RL and discovered that the black tank flush is not working properly. I have taken back to the dealer 2 times and still not working. Any Suggestions ?

How do you know it's not working properly? It's very hard to hear sometimes. Besides the possible kink, disconnect your hose from the Black rinse hookup and look at the screen washer in the hookup and make sure it is not clogged. I have had gunk come out of a used hose and clog that screen.

[rcflame]

I don't think there is too much that can go wrong. You should basically have the line, check valve, and spray head. I check the hose as far as possible and the check valve.