2102 31 sl cable and satellite wiring

[katy4man]

Looking for a diagram of wiring for satellite and cable for this one....

[ted 95]

if you have as many wires as I do coming out from all points. You may need to do what I did. Number all the wires where they come out of the wall.There is about 20 including the 3 feeds on the roof. Then go buy about 20 - 12v light bulbs, sockets along with female to female cable connectors. Also a small 12v 3amp battery. All this should cost you 30$ at a electronics store. Solder one wire from the sockets to the connector outside threads and push the other wire into the center. Once you have connected a bulb to every cable coming out of every where you can now take the 12v battery and start identifying where all the cables go by lighting up the bulbs one by one. You will find there is not only feeds from the roof or the service area but there are jumpers between the tv stations and if you don't identify them properly it can get real confusing. If want to PM me your email address I can send you a copy of what I wound up with. Sorry I tried to post it here once and just could not do it.

[katy4man]

k thanks I will pm you

[katy4man]

I have King flex sat.. ant.. It has 2 outputs so going to leave antenna down turn off booster and run 2nd sat feed into cable side and put 2nd receiver in bedroom and see if that will work.... We don't go to that many rv sites in Oklahoma just really have 2 we use and there is not any cable at either one...that is basically how I had to rig it up in the motorhome.......southern ingenuity...