Ceiling lights

[Rosey]

I'm sure this was asked before but couldn't find any info. Just wondering how to gain access to the ceiling led bulb(s) ? Do the plastic covers pry or twist off? I would also like to go to a "softer" more incandesant type light in some areas instead of the harsh white light. Any suggestions for a replacement bulb(s)?

[atom ant]

I believe they are a 1/4 turn counter clockwise unless they changed brands since I looked at them at the showroom. Unfortunately, I don't think they have replaceable bulbs, and I don't think there are any choices in the light. You would probably have to replace the fixture with a different brand, which there are plenty of around.

[rob_fla]

The old style Halogen units had Glass Lens (Due to the Heat of the Halogens) and were 1/4 turn to remove, the new LEDs use a plastic lens that are screwed on several turns.
Turn the plastic LED lens Counter Clock Wise as facing it several turns to remove the lens.

AA is right, you cannot replace the light in the new LEDs , it is a puck style LED, you will have to replaced the whole fixture to change the type and level of light output.

[Rosey]

Not what I was hoping to hear but thanks anyway for info. guys.

[Kaidocl]

For example if the are G4 20watts just go on eBay or amazone and on the search bar type G4 20w and many different colors or brightness should pop up for you, the will all fit unless the are the ones with 30or more led per bulb.