Control Wire

[rayrussel]

2014 38GK With Slide-in-Slide
Every time I cycle the bedroom slides I find one of the high torque motor control wires laying on the floor next to the bed. It's the one closest to the front cap.
Does anyone know where or how this wire is supposed to be routed?

[collindo]

we have the same wire it is the wire to the slide motor on that side of the slide I think it should just tuck under the bed on that side but as the slide goes in and out it wiggles into the open. I just tuck it back under.

[Adamsvr]

We have 2012 RL with a slide in a slide and have never noticed that wire coming out from under the bed.

[atom ant]

Originally Posted by Adamsvr

We have 2012 RL with a slide in a slide and have never noticed that wire coming out from under the bed.

You may have one of the earlier designs where the motors were removed from the outside. They had a little better trim on the inside.

[Adamsvr]

You might be right. Our unit came off the production line in the summer of 2011.

[SueMar]

We have a 2013rl, no slide-in-slide, and we have a wire that comes out from under the nightstand closest to the front cap. Don't know what it's for, I just keep tucking it back in.