Inverter not powering up

[Bjesquivel]

Hi,

I have a 2016 36 ft rear living cypress redwood. The magnum energy pure sine wave inverter, model number csw1012, is not powering up. I have check fuses and breakers as well as the fuse between th inverter and batteries all with no luck. Any ideas ladies and gentlemen?

[RCAircraft]

Originally Posted by Bjesquivel

Hi,

I have a 2016 36 ft rear living cypress redwood. The magnum energy pure sine wave inverter, model number csw1012, is not powering up. I have check fuses and breakers as well as the fuse between th inverter and batteries all with no luck. Any ideas ladies and gentlemen?

If possible relocate the unit to near your truck battery and connect then test the output Hz and voltage. Take care with the polarity when connecting to the truck battery.

[ted 95]

some of these questions you have possibility done.
all connections to batteries are solid and clean with no corrosion.
all connections between the batteries are the same clean and tight.
the ground is solid
battery sw is on??
barreries are full of watere
no fuse inside the inverter is blown??
get an auto 12v tester with a bulb just to be sure all has the power it needs

try to verify all the fuses show power on both sides of the fuses