LED Ceiling Light Replacement

[badshow]

where can I get the 4.5 and 3.5 inch LED ceiling lights? I need to replace some of them. I ask redwood they sad dealer and of coarse the dealer said redwood.

[r time soon]

Have you tried Tiara RV in Elkhart, IN?? They will need your vin#. But they can get you the lights you need. They are the parts people for our Redwoods.
Tiara RV Sales and Service
3260 Cassopolis St.
Elkhart, Indiana 46514
866.880.3093


Chris

[johnboytoo]

Do you need the fixtures or the bulbs ?

bulbs on Amazon...
or if you want a BUNCH of the halogens, I replaced all mine with LEDs

[Shane Wood]

Mine are fixture replacements and purchases through Tiara

[Grumpy-CC-35]

What is the P/N of the replacement LED's and are they compatable with the Halogen light socket?

[Foxfire]

I walked into my selling dealer. He looked it up online and a week later I had them.

[rob_fla]

Originally Posted by Grumpy-CC-35

What is the P/N of the replacement LED's and are they compatable with the Halogen light socket?

The Halogen LED Replacements are a different bulb than what they are currently installing in the Redwood product.
The current product has the LED made into the fixture, the Halogen replacement LEDs are a plug in type bulb.

[johnboytoo]

I realize you are talking fixtures here, but if after just replacement bulbs, here's a pic of the old halogen that was in ours versus the new led's I put in - your bulbs may vary

I got them on Amazon and only thing I had to do was clip the length on some of the pins to allow easier insertion..
the hardest part was getting the old lens off since the halogens were so hot they fused some of the lens to the ceiling material !!!
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

and for the smaller lamps:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[Char & Steve]

Our rig was at the transition over to LEDs so I ended up with the 2 pin Halogen so when I was trying to get the ACs to perform better I did away with the Halogens and replaced with all LEDs. Wasn't cheap and now I always end up with 2 or 3 that fall out when moving and have to push the LEds back in again.. Has anyone used a different style fixture that they have good feedback on?

Steve

[Foxfire]

Do your fixtures have the spring loaded feet? I had a hard enough time getting it out. I can't imagine them falling out. Unless we're talking about different fixtures


Sent from my iPhone using Tapatalk

[Char & Steve]

Sorry.... not the fixture. Just the LED bulb.

Steve

[johnboytoo]

"Shirley" you jest

I had to get into surgeon mode trying to fit them in - can't imagine them coming out!

with the bendable wires, I guess you could always give them a little 'spread' to put some resistance on them moving any ???