While traveling in Texas we had a blowout that took out all the 12V power and the propane line to the refrigerator and stove in our 2014 31SL. I've gotten everything fixed up with the exception of running the propane line to the stove from the refrigerator. The run looks pretty straightforward, but my question is should I put the Tee and run the stove LP line inside the slide or outside the slide and up through the slide bottom? It seems inside the slide would provide more protection and reduce the risk of exterior debris putting a hole in the line. On the other hand it might allow propane to settle internal to the trailer (if there was an internal leak). Since the blowout took out all the original lines, I am not sure how the factory routed it. Does anyone with a 31SL or similar layout know or have other thoughts? Thanks.
Don't have your model, but personally would run it outside as much as possible for safeties sake.
I know there's other 31SLs here so maybe they'll chime in.
__________________
Danny & Linda
Full-timed 10+ years
Former '13 FB owner
Traded '13 GMC Denali DRW D/A
Currently rv & truckless
Replacement undetermined
The LP lines go out the bottom of the tank cabinet and run along the outside of the frame until they get to the slide about where refrigerator is. Then up through the floor of the slide.
Hope that helps.
__________________
Larry, Stephanie Park City, Utah
2017 31SL King, 8K axles, Disc Brakes,17.5 Goodyear H tires,BU Camera,5.5 Onan, Heated HT pads, Two Uniguard Awnings, Slide Toppers, 2000w PSW inverter
thanks! I think this will help. Based on this info, the tee and the run to both the fridge and the stove are internal to the slide. I looked at a few Montana's the other day and they all seem to so something similar, except that both the stove and the fridge run lines from the main propane trunk, no tee.
This seems like a tough call, thanks to everyone for the advice and help.
Linear Mode
