SRE4000 Questions

[5th_Time]

Hi All:

Getting ready to follow the leaders and install the SRE4000 on my RL.

The instructions show the crossmember (U021-003) to be installed (starting at Step #4) but noone has described installing it. Are you installing as part of kit install?

Does it interfere with the Joyryder install? Anyone have both?

[markw]

Originally Posted by 5th_Time

Hi All:

Getting ready to follow the leaders and install the SRE4000 on my RL.

The instructions show the crossmember (U021-003) to be installed (starting at Step #4) but noone has described installing it. Are you installing as part of kit install?

Does it interfere with the Joyryder install? Anyone have both?

It is recommended by the maker. There is more leverage with the 4000 on the frame mounts. I believe that is the reason for it.

Mark

[Char & Steve]

Cross member is part of the kit but shipped separately at least in my case.
Install at the same time but I did mine last after I finished everything else in the kit. Will not interfere with the shocks at all.

Seve

[markw]

I don't have the shocks but would suspect there is no problem.

Mark

[spindrift]

Originally Posted by 5th_Time

The instructions show the crossmember (U021-003) to be installed (starting at Step #4) but noone has described installing it. Are you installing as part of kit install?

Same thing here. When Brown delivered the additional box for the cross member, I was confused enough to call MorRyde for an explanation.
Then again, my online experience with the original vendor was terrible.