Guys, wife insisted I swap the bathroom light switch and the fan switch so the light switch was the closest to the door. During this, I found this cable taped up in the wall behind the switch, any idea what this is for?
It is an communication cable for a replacement and upgrade bath fan. Remove the shroud for your bath fan and the other end should be there too. Not sure which models are available now that use that type of cable but our ceiling fan over the kitchen uses the same cable. Uses a better controller/switch for open and close and fan speeds etc.
__________________ Chris & Maria
2012 36RL, Full Body Paint, Dual Awning, Dual a/c, Splendide Combo, Fisher Paykel dishwasher, 6.5kW Onan, Goodyear G614's. 2015 F550 6.7l, 4X4, Lariat, CC, 176" WB, Long Box, B&W Companion
My wall control modules for each of our three MaxxAir Vent Fans are connected between the control and fan by a similar data connector.
__________________
Michelle & Ann
2018 Chevy 3500HD Crew Cab High Country DRW, D/A, 2016 RW39MB, Dual ACs, Auto Level, Auto Sat Dish, Stack W/D, King Sleep #, 17.5" Sailuns w/Disc, MORryde IS & Pin, Comfort Ride Hitch, 5.5 Onan, Res Fridge & Induction Cook Top
Chris & Maria
Linear Mode
