 |
08-31-2019, 08:01 PM
|
#1
|
|
Junior Member
Join Date: Jun 2018
Posts: 14
|
Working leveling system.
Hi I have a 3901WB, 2018 and when operating the leveling system in order to hook up the pin box to trailer hitch I can not see the pin location because of where the level controls are located. Dose anyone know if there is a bluetooth controler that can be added?
Thanks,
Mike
|
|
|
|
08-31-2019, 10:05 PM
|
#2
|
|
Senior Member
Join Date: Jan 2012
Posts: 2,811
|
Where did they put your controls?? Mine are on the Left (Drivers side) Front and I have a clear view to the Pin Box.
__________________
Michelle & Ann
2018 Chevy 3500HD Crew Cab High Country DRW, D/A, 2016 RW39MB, Dual ACs, Auto Level, Auto Sat Dish, Stack W/D, King Sleep #, 17.5" Sailuns w/Disc, MORryde IS & Pin, Comfort Ride Hitch, 5.5 Onan, Res Fridge & Induction Cook Top
|
|
|
|
|
08-31-2019, 10:40 PM
|
#3
|
|
Junior Member
Join Date: Jun 2018
Posts: 14
|
Hi, my controls are inside the same left side cabinate as water connections, which is back of storage unit.
Thanks for your reply,
Mike
|
|
|
|
|
09-01-2019, 01:35 AM
|
#4
|
|
Senior Member
Join Date: Jan 2012
Posts: 2,811
|
Well that explains a lot. Don't know what to tell you, other than move it a little and then check, and if need be move a little more.
__________________
Michelle & Ann
2018 Chevy 3500HD Crew Cab High Country DRW, D/A, 2016 RW39MB, Dual ACs, Auto Level, Auto Sat Dish, Stack W/D, King Sleep #, 17.5" Sailuns w/Disc, MORryde IS & Pin, Comfort Ride Hitch, 5.5 Onan, Res Fridge & Induction Cook Top
|
|
|
|
|
09-01-2019, 02:52 AM
|
#5
|
|
Senior Member
Join Date: Jul 2015
Posts: 2,313
|
That is where our controls are on our 2020.. I dislike the position, but deal with it.
__________________
2020 F-350
2020 3991RD with-
17.5 Goodyear 114's , Titan Disc brakes, MorRyde 8K IS, Onan 6.5..
|
|
|
|
|
09-07-2019, 05:39 PM
|
#6
|
|
Junior Member
Join Date: Aug 2019
Posts: 1
|
Quote:
Originally Posted by Miker
Hi I have a 3901WB, 2018 and when operating the leveling system in order to hook up the pin box to trailer hitch I can not see the pin location because of where the level controls are located. Dose anyone know if there is a bluetooth controler that can be added?
Thanks,
Mike
|
I have the same 5th wheel and had the same issue. I downloaded the In Command app. You can raise and lower the front jacks from your phone. You can also open your slides, awnings, turn on lights and a few other things.
|
|
|
|
|
09-07-2019, 05:50 PM
|
#7
|
|
Member
Join Date: Mar 2019
Posts: 43
|
Yeah, you need the InCommand App. I struggled with the same issue until I figured that out. There's a "Hitch" button...you can do it from inside the cab of your truck.
|
|
|
|
|
09-07-2019, 06:59 PM
|
#8
|
|
Junior Member
Join Date: Oct 2016
Posts: 4
|
Working Leveling System
I would recommend the utilizing the LCI OneControl App which can be used on IOS & Android smart phones. We use for lights, awnings, leveling, monitor panel & slides.
|
|
|
|
|
09-07-2019, 07:15 PM
|
#9
|
|
Junior Member
Join Date: Aug 2019
Posts: 1
|
iN Command app works great! Controls pin, all interior lights, HVAC, see tank levels, water heater, etc
Can’t imagine hooking up without it!
|
|
|
|
|
09-07-2019, 07:23 PM
|
#10
|
|
Senior Member
Join Date: Sep 2016
Posts: 141
|
If you have incommand system you can bluetooth to it and work it from inside truck as you hook up ours works very well..
|
|
|
|
|
09-08-2019, 02:12 PM
|
#11
|
|
Junior Member
Join Date: Jun 2018
Posts: 14
|
Thank you to all who replied, I will try the App.
Mike
|
|
|
|
|
09-15-2019, 09:55 PM
|
#12
|
|
Junior Member
Join Date: Jul 2019
Posts: 13
|
If you push the left and right arrow at the same time the front jacks will return to the level it was at before you pushed auto level. This is the way OURS works. Makes it easy to hook up
|
|
|
|
|
09-15-2019, 10:32 PM
|
#13
|
|
Senior Member
Join Date: Jan 2014
Posts: 747
|
Most of the time when you push both left and right arrow at the same time the front will return to unhitch height. It will sometimes give an error, which you have to acknowledge by pressing enter, and you might have to raise or lower the front manually. It does this to prevent dropping the pin box and the front of the coach too low and avoid a collision with your truck bed rails or your hitch. Works at 70+% of campsites on our set up.
__________________
 Chris & Maria
2012 36RL, Full Body Paint, Dual Awning, Dual a/c, Splendide Combo, Fisher Paykel dishwasher, 6.5kW Onan, Goodyear G614's. 2015 F550 6.7l, 4X4, Lariat, CC, 176" WB, Long Box, B&W Companion
|
|
|
|
|
09-15-2019, 10:41 PM
|
#14
|
|
Junior Member
Join Date: Jun 2018
Posts: 14
|
Hi, I have tried that as it says on the sticker inside the cabinet but that dose nothing. The only way I can get it to retract is in manual mode.
Mike
|
|
|
|
|
09-16-2019, 06:45 AM
|
#15
|
|
Senior Member
Join Date: Sep 2012
Posts: 3,353
|
Quote:
Originally Posted by Borkfarm
If you push the left and right arrow at the same time the front jacks will return to the level it was at before you pushed auto level. This is the way OURS works. Makes it easy to hook up
|
If you've pushed any buttons after it's auto leveled the hitch memory will be lost for that cycle.
__________________
Danny & Linda
Full-timed 10+ years
Former '13 FB owner
Traded '13 GMC Denali DRW D/A
Currently rv & truckless
Replacement undetermined
|
|
|
|
|
09-19-2019, 04:34 AM
|
#16
|
|
Junior Member
Join Date: Sep 2019
Posts: 15
|
Before you use the incommand app. Make sure you sync the floorplan with the app. Or it could do things you don't want it to do.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
