2013 Redwood 36 RE refit Fridigaire IM /vs nevercold1200IM updates

[proteus]

Big project upgrade ,have been working on reinsulating refer slide cabinet area with 1/2" foam board and foil mylar tape ,slide opening has been fully sealed with foam board ,relocated elect outlet is recessed inside cabinet lower left cabinet wall on floor bracket, Also have Titan Twin 140mm intake and exhaust fans mounted in refer exterior wall foamboard refer vent openings, intake and exhaust, strapped with 1 1/4" aluminum angle into exterior vent openings quite secure.

and removed and relocated propane line and capped off, Installled all new 25' braided stainless icemaker line good to go from below lower island cabinety valve thru insulated belly and then thru frame rail to bottom of slide hole in slide cabinet,perfect
removed lower 6"refrigerator floor board and wide lower drawer and lowered original 1/2" plywood floor sheeting 17/8" above linoleum for slide wiring , secured with #2 wolmanized 2x4" spacers boards tidied up, all above wiring mess below pedestal.
instaled usb 110v plug beside rh kitchen stove new fancy outlet , real nice

and have intstalled fresh upper and lower 140mm Titan thermo controlled intake and exhaust fans. done .
really sweet install, have fridigaire french door icemaker bottom freezer sitting by island,

Thermo wiring tommorow should fit nicely in measured cabinet openings,

ready to finally install


have a lot of extra parts for norcold 1200 im sitting from camper with cherry door inserts to sell or give away in Austin tx.

ramping up for new roof install and repaint end caps next, new tv coming with sound bar too. and entertainment reciever Denon?

karl b.
austin tx

karl b.