Awning wiring

[Jim & Mary]

During the recent installation of my inverter, part of the process required to remove the rear basement storage wall (where the vacuum is installed). Our two awnings extend/retract switches are located here. In all the jostling around some of the wires came loose, so I removed the wall piece altogether. I think I may have not written down the wiring color codes and where they go, so I was wondering if anyone here has written down the color codes for them. I have the 2nd awning so there are two switches. Help, please. I called RW customer service and they were rude and as helpful as a rubber crutch.

Thanks,

Jim

[5th_Time]

I'll wait couple mins for any response, then I'll take mine apart.

[5th_Time]

Main (outboard switch)
With "Extend" end facing you:
Left top - blue w/white (jumper from right bottom)
Left Middle - single white
Left Bottom - double white
Right Top - jumper from left bottom
Right Middle - single blue w/white
Right Bottom - double blue w/white

[Jim & Mary]

Mike

Thanks so much for your help. I feel bad having someone have to take apart their coach just to help someone else, but surely know I very much appreciate it. That's really Redwood people support. Too bad Redwood corporation doesn't feel the same way. Thanks again

Jim

[5th_Time]

Slide (inboard switch)
With "Extend" end facing you:
Left Top - double red w/white
Left Middle - single red w/white
Left Bottom - jumper from top right
Right Top - double white
Right Middle - single white
Right Bottom - jumper from top left

[Jim & Mary]

Mike

Again, many thanks for your help..........

[spindrift]

Originally Posted by Jim & Mary

as helpful as a rubber crutch.

I'll have to remember that one!

[Rick and Mindy]

Getting old messes with your eyes! I had to look twice. I thought you said "as helpful as a rubber crotch"! Had a whole different meaning!!!!!!!