Anyone replaced a closet door slide rail yet? Been searching the forum and didn't see anything. Lost my closet door after a rough patch of road in NC. the little roller bearing pieces were laying on the floor. Would like to replace them and if something better, all the better. They look to be pretty normal but on the cheap side. Thanks.
Same happened to my front closet doors. They were hanging with drawer gliders. I purchased replacement from Lowes or Home Depot. Not easy to stand inside the closet and get access but can be done!
Funny I changed mine this past weekend. They were 28" drawer glides. A pain in the ass as I wasn't properly prepared but it got done. To do it properly bring 2 door chocks they'll allow you to adjust the height while doing the installation.
Thanks to both. Heading to Lowes tomorrow. Hopefully find something in that size a little beefier. Thanks for the door chock tip. It was hard enough to stand in there to begin with, need to get in and get out.
Measure the slide mine on a 31sl were 28". It broke 2 weeks ago. Lowes and Home Depot only had 24" slides. I ordered them as a pair from amazon and fixed it last weekend.
Had to order from Amazon, Lowes and Home Depot didn't have that size. I have an extra 28" now, looking at the closet from the bathroom, the left slide is 30" and the right side is 28". Thanks again everyone.
Linear Mode
