Question for those of you with the 'rotating' table
When stored 'long ways', as in the second pic below,
it makes for a tight fit to sit at it for those of us
that have "partaken of the suds"
So we like to rotate it so it is perpendicular to the rv, with the long side pointing toward the island...
Is yours difficult to rotate ? or am I just a doofus and can't twist and unlock at the same time
Will lubing it help? if so, with what ?
And finally, thinking it can be stored that way for travel without hitting the island on a 38gk?
Thanks in advance !
__________________
Ours: '11 Monaco Diplomat 43DFT followed closely by '14 Jeep 4 dr Wrangler.
Hers: '13 Explorer Sport - AWD 365hp twin turbo scooter!
Previous: '13 Ford F350 CC Platinum and '13 38GK
Same here. And we normally have ours perpendicular. Clears the island fine.
__________________ Vaughan & Tracy 2013 RW 36RL, 2013 F350 DRW CC, 2016 Focus. MorRyde IS, MorRyde pinbox, disc brakes, Comfort Ride Hitch. "Life is to be embraced, Grab it with both arms ! "
We also have the same table in our 36rl. It used to be very hard to pull the Tee handle down to slide and rotate the table. Found a hard rubber/ plastic tip on the floor one time and assumed it came off of the shaft connected to the Tee. Must have been there for vibration and a snug fit. since it's not there anymore table is a breeze to change around. Our plastic tip was all chewed up so I never tried to reinstall it. Chris
See - maybe I was trying to force a round pep into a square hole !
thanks for the pointers....
so release the pin,
pull out as far as you can THEN turn...
will give it a try... and then leave it there
__________________
Ours: '11 Monaco Diplomat 43DFT followed closely by '14 Jeep 4 dr Wrangler.
Hers: '13 Explorer Sport - AWD 365hp twin turbo scooter!
Previous: '13 Ford F350 CC Platinum and '13 38GK
Vaughan & Tracy 2013 RW 36RL, 2013 F350 DRW CC, 2016 Focus. MorRyde IS, MorRyde pinbox, disc brakes, Comfort Ride Hitch. "Life is to be embraced, Grab it with both arms ! "
Linear Mode
