Trail Air Hitch and Ram 3500

[GA1817]

My 36RL is riding a little nose high. My B&W hitch is at its lowest setting. Below is a pic of the Trail Air. Do I have any movement to adjust it. It appears if I can I would only have four bolts in the back?

[rob_fla]

I had to set our Curt Q24 at its lowest setting, our RW came out level at that setting.
I would sure not want less hardware / bolts holding these heavy 5th Wheel Pin Boxes on.

[Titan Guy]

I'm not sure you want to mess with the trail air settings. It appears you have a 2WD Ram? I have 2WD 2014 Ram and had Mor/ryde IS installed in Sept. They raised the back by 2" which made me tow level. There was some other discussion about another suspension(economical) that raised the RW 2". I would be more inclined to go that way if you think it's a problem.

[GA1817]

Titan mine is a 4X4. I am not planning on doing a lot of traveling short time so i will leave it as is. It pulls great as is.

[atom ant]

Exactly why I went to the Reese instead of B&W. My trailair is at the highest setting with no more adjustment, and the B&W sets 2.5" taller than the Reese. Nose high is an issue for me.